Preparation of glycopolymer‐coated magnetite nanoparticles for hyperthermia treatment

In this article, magnetite nanoparticles (MNPs) coated with glycopolymer bearing glucose moieties were designed with optimal structural, colloidal, and magnetic properties for biomedical applications. MNPs with an average size of 17 ± 2 nm were synthesized by thermal decomposition process and then their surfaces were modified with active vinyl groups. Two different monomers were immobilized onto the surfaces: dopamine methacrylamide, a monomer with properties inspired on mussels adhesive capacity, or unprotected glycomonomer, 2‐{[(D ‐glucosamin‐2N‐yl)carbonyl]‐oxy}ethyl methacrylate. Afterward, the glycomonomer were polymerized at the interface of both vinyl functionalized MNPs by conventional radical polymerization. The resultant hybrid NPs were water dispersible presenting good stability in aqueous solution for long time periods. Moreover, the high density of carbohydrates at the surface of the magnetic NPs could confer targeting properties to the system as demonstrated by studies of their binding interactions with lectins, where the binding activity is higher as the glycopolymer content augments. The magnetic and magneto‐thermal properties of the synthesized hybrid NPs were evaluated. The magnetization curves reveal superparamagnetic features at 300 K, with high values of saturation magnetization. Furthermore, the hybrid glycoparticles show suitable heat dissipation power when exposed to alternating magnetic field conditions. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Cathodes for Aqueous Zn-Ion Batteries: Materials,Mechanisms, and Kinetics

As concerns about the safety of lithium-ions batteries (LIBs) increases, aqueous zinc-ion batteries (ZIBs) with a lower cost, higher safety, and higher co-efficiency have attracted more and more interest. However, finding suitable cathode materials is still an urgent problem in ZIBs. In recent years, a lot of significant works have been reported, including manganese-based cathodes, vanadium-based cathodes, Prussian blue analog-based materials, and sustainable quinone cathodes. In this review, some typical cathode materials are introduced. The detailed storage mechanisms and methods for improving the reaction kinetics of the zinc ions are summarized. Finally, the issues, challenges, and the research directions are provided.     

Nucleophilic substitution of ferrocenyl alcohols catalyzed by bismuth(III) in aqueous medium at room temperature

A nucleophilic substitution reaction of an α‐ferrocenyl alcohol with various amines, indoles and thiols was successfully developed by using a catalytic amount of Bi(NO₃)₃.5H₂O at room temperature without the aid of phase transfer catalyst. The reactions proceeded in aqueous media, leading to the formation of new C=C, C=N and C=S bonds bearing ferrocenyl substituent with high efficiency. Copyright © 2012 John Wiley & Sons, Ltd.     

Simultaneous derivatization and air-assisted liquid–liquid microextraction of some aliphatic amines in different aqueous samples followed by gas chromatography-flame ionization detection

The paper presents a new method based on simultaneous derivatization and air-assisted liquid–liquid microextraction (AALLME) for the extraction and preconcentration of some aliphatic amines prior to gas chromatography-flame ionization detection (GC-FID). Primary aliphatic amines are derivatized and extracted simultaneously by a fast reaction with butylchloroformate (derivatization agent/extraction solvent) under mild conditions. The mixture of butylchloroformate and aqueous sample solution is rapidly sucked into a 10-mL glass syringe and then is injected into a test tube with conical bottom and the procedure is repeated seven times. After centrifuging the resulted cloudy solution, the derivatized analytes in the sedimented phase are determined by GC-FID. The influence of main factors on the efficiency of derivatization/extraction procedure is studied. Under the optimal conditions, the enrichment factors (EFs) for aliphatic amines are obtained in the range of 248–360 and limits of detection (LODs) are between 0.30 and 2.6 μg L⁻¹. The obtained extraction recoveries ranged from 50 to 72% and the relative standard deviation (RSD) was less than 4.8% for intra-day (n = 6) and inter-days (n = 4) precision. The method is successfully applied to determine some aliphatic amines in environmental water samples.     

Microstructure of metallic copper nanoparticles/metallic disc interface in metal–metal bonding using them

This paper describes a metal–metal bonding technique using metallic Cu nanoparticles prepared in aqueous solution. A colloid solution of metallic Cu particles with a size of 54 ± 15 nm was prepared by reducing Cu²⁺ (0.01 M (CH₃COO)₂Cu) with hydrazine (0.6 M) in the presence of stabilizers (5 × 10^?4 M citric acid and 5 × 10^?3 M cetyltrimethylammonium bromide) in water at room temperature in air. Discs made of metallic materials (Cu, Ni/Cu, or Ag/Ni/Cu) were successfully bonded under annealing at 400 °C and pressurizing at 1.2 MPa for 5 min in H₂ gas with help of the metallic Cu particle powder. Shear strength required for separating the bonded discs was 27.9 ± 3.9 for Cu discs, 28.1 ± 4.1 for Ni/Cu discs, and 13.8 ± 2.6 MPa for Ag/Ni/Cu discs. Epitaxial crystal growth promotes on the discs with a good matching for the lattice constants between metallic nanoparticles and metallic disc surfaces, which leads to strong bonding. Copyright © 2013 John Wiley & Sons, Ltd.     

A Direct and Rapid Route to Synthesize Pd/Si‐MCM‐41 at Room Temperature

The pure silica mesoporous molecular sieve MCM‐41 was synthesized under hydrothermal conditions. Pd/Si‐MCM‐41 was prepared by the incipient wetness impregnation of pure silica MCM‐41 with mixed solution of PdCl₂, ethanol and CH₂Cl₂. The samples were characterized by x‐ray diffraction (XRD), transmission electron microscopy (TEM), and nitrogen adsorption–desorption isotherms at 77 K. The XRD and TEM results reveal that Pd is actually anchored inside the pores of Si‐MCM‐41 and the Si‐MCM‐41 structure is clearly maintained after impregnation.     

Properties of Aqueous Polyurethane Dispersion Modified by Epoxide Resin and Their Use as Adhesive

The aqueous polyurethane hybrid dispersion modified by the epoxy resin were synthesized using 1,4-butanediol ( BDO ) and dimethylolpropionic(DMPA) as chain extenders. A kind of automobile interior decoration adhesive was made by the modified hybrid dispersions. Effects of the content and the kinds of epoxide resin on the properties of dispersions and dispersion-cast films such as appearance, pot life, viscosity, particle size, molecular mass, hardness, swelling in water, contact angle, strength of stress, elongation at break, and other mechanical properties were studied. At the same time the effect of the E20 content on the peel strength of the adhesive for several automobile interior decoration substrates such as rubber/wood, poly(vinyl chloride)/wood; leather/wood, sponge/wood was investigated. The experimental results show that when the epoxy resin E20 content was 8%, the modified polyurethane hybrid dispersions possess better properties and the adhesive made by the modified dispersions posses better adhesion for automobile interior decoration substrates. The stress-strain curve of the modified aqueous polyurethane hybrid dispersions films shows the modified aqueous cast films possess better rigidity and toughness.     

Convenient Synthesis of 2-Aminothiophene Derivatives by Acceleration of Gewald Reaction Under Ultrasonic Aqueous Conditions

Under ultrasound irradiation and in the presence of H₂O/Et₂NH, ethyl cyanoacetate or malononitrile can combine with α-methylene carbonyl compounds and elemental sulfur to efficiently yield 2-aminothiophene derivatives within a few minutes. Products are easily obtained by simple filtration because of their spontaneous precipitation in the reaction mixtures.     

缺陷金属有机骨架的制备及其去除水中污染物的研究进展

在避免母体结构坍塌的前提下,通过缺陷工程对金属有机骨架(MOFs)进行处理可有效提升其去除水体污染物的性能。目前,通过调整合成条件(温度、金属/配体比例等)、添加调制剂、热处理和金属节点取代等方式可制备缺陷MOFs。粉末X射线衍射(PXRD)、比表面积分析、热重-差热分析(TGA-DSC)、电子顺磁共振(EPR)、X射线光电子能谱(XPS)、高分辨率透射电子显微镜(HR-TEM)、球差校正透射电镜(AC-TEM)和X射线吸收光谱(XAS)表征技术可证实MOFs中缺陷的特征。相比原始MOFs,从光催化等高级氧化的角度来看,构造缺陷型MOFs可促进电子转移、减小带隙以提升其高级氧化降解去除污染物的性能。此外,缺陷型MOFs还可为污染物提供更多吸附位点,进一步提升吸附剂的吸附容量和吸附速率。本文系统总结缺陷MOFs的制备方法、现有常见表征技术及其在水处理领域中的应用。同时,本文还根据缺陷MOFs用于去除水中污染物的研究现状对其今后发展予以展望。     

单层MoS2悬浊液的制备及其摩擦学行为研究

用插层法制备了单层MoS2在水中的悬浊液，采用X射线衍射仪、透射电子显微镜以及扫描电子显微镜表征了单层MoS2的结构，用四球长时摩擦磨损试验机考察了单层MoS2在水中的悬浊液的摩擦学行为．结果表明：MoS2经剥层一重堆过程处理后形成单层MoS2，单层MoS2在水中以单片或者多片重叠形式存在，其间距由0．615nm增大为0．622nm；所合成的单层MoS2悬浊液在一定添加量范围内表现出良好的减摩能力．这是因为其在钢球磨损表面生成含FeS的保护膜，而保护膜的剪切强度较低，因而表现出良好的减摩性能，但活性元素S易导致钢的过度腐蚀而使抗磨性能反而变差．